Typical example through Honda Finance Europe PLC, subject to acceptance. Finance can be personalised to your requirements.
CALL US NOW ON 020 8668 8851 020 8668 8856
Share this bike
Additional Information
In arriving at the final design of the new SH125, Honda's development engineers strove to incorporate a well considered response to the many desires voiced by Europe's active scooter riding public. The sleek bodywork of this new creation thus combines clean, aerodynamic lines with a timeless sense of modern sophistication that will appeal to all age groups and tastes in style.
The SH125's slim proportions also combine with a low seat height and board, flat floorboard area to provide comfortable accommodations and an effortless reach to the ground. For friends in tow, the broadly contoured rear section of the seat provides a comfortable perch for long rides, assisted by a beautifully integrated set of fold down foot rests that give a wide and secure place to rest one's feet. Carrying accommodations are also a priority amongst urban travellers and commuters, and the SH delivers with an underseat compartment designed large enough to carry a helmet and more while still preserving the bodywork's narrow outer proportions and low seat height. Up front, a locked compartment opens to reveal a compact glove box designed to carry daily accessories. Finance subject to status. Written details available upon request.
Specifications
Engine
Type
Liquid-cooled 4-stroke SOHC single
Displacement
125cm3
Bore x Stroke
52.4 x 57.8mm
Compression Ratio
11: 1
Max. Power Output
10.1kW/9,000min-1
Max. Torque
11.5Nm/7,250min-1
Idling Speed
1,500min-1
Oil Capacity
1litres
Fuel System
Carburation
PGM-FI electronic fuel injection
Throttle Bore
26mm
Aircleaner
Dry; cartridge-type paper filter
Fuel Tank Capacity
7.5litres
Fuel Consumption
37.7km/l (23.4m/l / 106.4mpg) WMTC mode*)
Electrical System
Ignition System
Digital transistorised with electronic advance
Ignition Timing
10° BTDC (idle) ~ 40° BTDC (8,500min-1)
Sparkplug Type
CR8EH-9 (NGK); U24FER9 (DENSO)
Starter
Electric
Battery Capacity
12V/6AH
ACG Output
300W
Headlight
12V, 55W x 1 (low)/60W x 1 (high)
Drivetrain
Clutch
Automatic; centrifugal
Transmission Type
V-Matic
Belt Converter Ratios
2.64~0.82
Final Reduction
11.42
Final Drive
V-belt
Frame
Type
Underbone; steel tube
Chassis
Dimensions
(LxWxH)
2,025 x 728 x 1,230mm
Wheelbase
1,335mm
Caster Angle
27°
Trail
85mm
Seat Height
785mm
Ground Clearance
150mm
Kerb Weight
136kg (F: 54.8kg; R: 81.2kg)
Max. Carrying Capacity
180kg
Loaded Weight
316kg (F: 100kg; R: 216kg)
Suspension
Type
Front
33mm telescopic fork, 89mm axle travel
Rear
Dual-damper unit swingarm, 83mm axle travel
Wheels
Type
Front
U-section 5-spoke cast aluminium
Rear
U-section 5-spoke cast aluminium
Rim Size
Front
16 x MT2.5
Rear
16 x MT2.75
Tyre Size
Front
100/80-16 (50P)
Rear
120/80-16 (60P)
Tyre Pressure
Front
175kPa
Rear
200kPa (with passenger: 225kPa)
Brakes
Type
Front
240mm x 4mm hydraulic disc with Combined three-piston caliper, drilled rotor and resin mould pads
Rear
240mm x 5mm hydraulic disc with single-piston caliper, Comb Brake and sintered metal pads
* Please note that the figures provided are results obtained by Honda under standardised testing conditions prescribed by WMTC. Tests are conducted on a rolling road using a standard version of the vehicle with only one rider and no additional optional equipment. Actual fuel consumption may vary depending on how you ride, how you maintain your vehicle, weather, road conditions, tire pressure, installation of accessories, cargo, rider and passenger weight, and other factors.
All specifications are provisional and subject to change without notice.